Great for a wind block or hot pad.
Lightweight, soft and pliable.
16 oz. heat resistant material.
Helps with stoves sinking into soil/sand.
Our Carbon Felt is made from 16 oz. heat resistant material and is useful as an ash catcher. Carbon Felt works great as a wind block for our stoves or a hot pad. Carbon Felt also solves the problem of stoves sinking into sand or soft soil while you are out camping. Note: Direct contact with flames or hot coals will degrade this material. This material is meant for non-flammable / non-damageable surfaces only.
The 6”X7.5” size is perfect as a liner for the Firebox Nano Leather Case and the 7.5”X12” size is a perfect liner for the 5” Firebox Stove Leather Case.
Inserting L-Pins into Carbon Felt:
On the long side of the Carbon Felt pinch the material between your thumb and index finger.
Using the L-Pins twist and gently push the pins into the Carbon Felt slowly so you do not poke it through the side walls.
Slide the pins into the Carbon Felt until L part of pin is completely inserted.
Use the same holes in the Carbon Felt each time you insert the pins until the spot is worn and then create new holes.
Note: See video below for more demonstration on how this is done.
Weight: Approx. 0.5 oz.
Length: 7.5”Thickness: Approx 3/16” (4.5 mm) not compressed.